GEPRC RAD VTX 5.8G 1.6W

Description

Resume:

I am pleased to introduce the newly developed RAD VTX 1.6W by GEPRC. It is a heavy-duty VTX with a maximum power of 1600MW and five adjustable gears: Pit/25mW/200mW/600mW/1600mW is adopted. Double-layer PCB design to separate the power supply from the main board, which can reduce and shield interference. Double-layer structure for better heat dissipation. The built-in microphone on the VTX board supports 7-36V voltage input (2-8S battery), uses the main MMCX connector, and the mounting hole is 30.5 ?? 30.5 mm.

Peculiarity:

Super power 1600mW, suitable for long-distance flights with good stability.
Five power channels: PIT mode/25mW/200mW/600mW/1600mW.
Double-layer board cooling structure, separate BEC power and main board, reduction and protection against internal interference.
Temperature control protection function, which can prevent high temperature burning
Wide voltage input, supports 7V-36V voltage input.
The VTX control protocol is IRC Tramp, supports setting OSD parameters.
Built-in VTX microphone, real-time transmission of drone sounds.
It has 3 regional frequency tables to meet the needs of different regions.
Two function buttons, three indicator lights, easy to operate.
Mounting hole 30.5 mm x 30.5 mm.

Specifications:

Model No.: GEPRC RAD VTX 5.8G 1.6W
Input Voltage: DC 7-36V (2-8S Battery)
Output: 5 V at 600 mA (5 V power supply per camera)
Input impedance: 75 ohms
Protocol: IRC Tramp
Antenna Interface: MMCX
Output Power: PIT Mode/25mW/200mW/600mW/1600mW PIT MODE
Frequency Tables: Universal Frequency Table (40CH), American FCC Frequency Table (37CH), European EU Frequency Table (26CH)
Video Format: PAL/NTSC
Microphone: Built-in microphone
Size: 36??36.5??5.5mm
Weight: 9.7 g (without cable)
Mounting hole: 30X30mm (M3)

ATTENTION:

Install the antenna before use.
To prevent overheating, ensure constant airflow and a well-ventilated environment. Install a cooling fan if operating in an enclosed environment.
The 5V output is for the camera/cooling fan only! Do not connect the power input/battery to the 5V output.

Connector Definition Description:

DC 7-36V: Input 2-8s Battery Powered
GND: Common Ground Wire
Video: Connect to FC video output or camera
IRC: Connect to the TX FC UART port
5V OUT: 5V power output per camera
GND: Common Ground Wire

????ڧ? ?ܧߧ??ܧ? ??? ??????ݧ?ӧ?ԧ? ??ߧէڧܧѧ????:

????? ???ߧܧ????ߧѧݧ??? ?ܧߧ??ܧ? ? ??ѧ?ѧݧ֧ݧ?ߧڧާ? ?? ?ݧѧߧ???? VTX, ? ???ҧ??? ??? ???ߧܧ???? ??էߧѧܧ???
???ڧ?? ??????ݧ?: ??ߧէڧܧѧ??? Ch
???֧ݧ֧ߧ? ??????ݧ?: ??ߧէڧܧѧ??? ????ѧ?ѧ٧?ߧ?
???֧?ӧ?ߧ? ??????ݧ?: ??ߧէڧܧѧ??? ?اڧӧݧ֧ߧߧ?

???ܧݧ????:

1 x GEPRC RAD VTX 5G8 1,6 ????
1 x 72 ?ާ? MMCX ????ҧ?ѧ??? ????էߧ? ?ѧߧ?֧ߧ?
1 x GH 1,25*6P 150 ?ާ? ?١???էߧ?ӧѧݧ?ߧڧ? ?ܧѧҧ֧ݧ?
1 x ???١???? MMCX ?է? SMA???ӧߧ??????ߧ??ԧ? ???ӧ??壩
1 x ????է?????էߧڧ? ??ѧܧ֧? ?ԧӧڧߧ????.

???٧????:

???ܧݧ??ѧ??: