GEPRC RAD VTX 5.8G 2.5W

Description

Resume
The RAD VTX 5.8G 2.5W High Power VTX has six adjustable power levels. The maximum power can reach 2500mW, the transmission signal is stable, and the penetrating power is strong. The double-layer PCB design is used to separate the power supply from the main control, which has strong anti-interference ability and the ability to dissipate heat strongly. It comes with three regional frequency groups, which can be switched at any time of your choice. IRC Tramp protocol, quick adjustment of OSD parameters. The built-in microphone returns the sound of the aircraft in real time. Wide input voltage 7-36V, direct input from battery 2-8s. It has temperature control protection function to prevent overheating and burning. It has two buttons and three indicator lights that are convenient and quick to operate. Use MMCX antenna main interface and GH 1.25-6P cable interface, 30.5mm ?? 30.5mm installation hole.
Features

High power 2500mW, stable performance, suitable for long-distance flights.
The seashore unobstructed distance test is about 10 km.
Six power levels can be adjusted: PitMode/25mW/200mW/600mW/1600mW/2500mW.
A good double-layer heat dissipation structure on the board separates the BEC power supply and the main control, reducing interference and shielding interference.
Temperature control protection function to prevent high temperature burn.
Wide voltage input, support 7-36V input voltage.
It has 3 regional frequency groups to meet the needs of different regions.
IRC Tramp Image Transmission Control Protocol, Support OSD Parameter Customization.
The on-board microphone transmits the image, the sound of the aircraft is transmitted to the ground in real time.
Two function buttons, three indicator lights, easy to use.
Mounting holes 30.5 mm x 30.5 mm.

Includes
1 x?GEPRC RAD VTX 5.8G 2.5W
1 x 72mm MMCX Copper Tube Antenna
1 x GH 1.25*6P connection cable 150cm
1 x MMCX Connector to SMA (Inside Hole)
1 x Matching Screw Pack
Notice

Install the antenna before use.
The temperature control protection will be activated and the power will be automatically reduced if the VTX overheats. Ensure good ventilation and heat dissipation during use. If the environment is limited, you can install a cooling fan to transmit the video.
The 5V output is only used for the camera or cooling fan. It is forbidden to connect the power input connector to the 5V output port, otherwise the image transmission will be damaged.