Happymodel ExpressLRS ELRS EPW6 900MHz 6CH PWM RC Fixed Wing Receiver

Description

Firmware Target:
DIY_900_RX_PWMP (factory default firmware), PWM receiver via 1~6 PWM outputs
HappyModel_RX_ES900_RX, CRSF serial receiver via TX and RX
Firmware update via UART or WIFI
Package Included:
1 x Happymodel EPW6 900 MHz PWM Receiver
1 x 915 MHz Antenna
1 x 868 MHz Antenna
3 x 6 pins 2.54 mm
Binding Procedure:

Apply power to the EPW6 RX, wait for the green LED on the RX to turn off, turn off the power immediately, and then repeat the above steps again. When the RX is turned on for the third time, the green LED indicator starts flashing twice, indicating that the RX is in bind mode
Enter the ELRS version menu. LUA V2.0 from your radio transmitter and then press BIND, the green LED on the RX module will glow with a continuous light if the pairing is successful.

Receiver LED Indicator Status Value:
A lit LED indicates a successful connection or connection has been established; Dual LED flash means in bind mode; Slow flashing of the LED means no signal connection from the TX module; Fast LED flashing means that in WIFI hotspot mode, you can connect WIFI RX and update RX firmware by visiting 10.0.0.1 in a web browser (password: expresslrs)